Atomatic Valves 113-12 (Globe) / 1113-12 (Angle)
  Operated by a 3-way solenoid, the main valve opens fully or closes
drip-tight depending upon the actuation position of the solenoid,
energized to open/energized to close. The valve may be remotely
operated by timers, relays, probes or any triggered device to
the solenoid.

Energized to open valve.
Optional: energized to close valve.
At time of order, advise factory actual system working pressure
for correct solenoid selection.
110-120 VAC, 50-60 Hz standard
Optional: specify voltage required.
Enclosure General Purpose (NEMA 1, 2, 3, 3S, 4, 4X)
Optional: explosion proof (NEMA 3, 3S, 4, 4X, 6, 6P, 7, 9)
Manual operator standard
Optional: Opening and/or closing speed.

QUICK SIZING: Valve size same as line or one size smaller.
Points to consider:
– Refer to Engineering Data - Flow Capacity Chart
– Pressure drop at required flow
Refer to Engineering Data - Pressure Drop Chart
– If valve size required is smaller than line size, consider ACV 6113-12
Consult Watts ACV representative/factory

Flow Direction Shown: Under the Seat
Optional ‘R’ Flow Over the Seat: 113-12R/1113-12R

–Electrically operated on/off (open/close) control valve
1. Main Valve
2. 3-Way Solenoid
3. Flo-Clean Strainer
ACCESSORIES             X - Isolation Cocks
Located as indicated     Y -Y - Strainer (Eliminates Flo-Clean)
Included as marked       ACS - Adj. Closing Speed
                                      ADS - Adj. Opening Speed