XLT Series Precision Linear Thrust Slides
  SPECIFICATIONS
• Maximum operating pressure: 100 psi
• Operating characteristics: double acting standard (single acting available)
• Four support rod sizes: 1/4", 3/8", 1/2", 3/4"
• Stroke tolerance: ± 1/16"
• Mounting: unrestricted
• Operating temperature range (cylinder): Standard seals 0 to 165°F Viton seals* 0 to 250°F
• Filtration requirement: 40 micron filtered, dry air
FEATURES:
• ALIGNMENT COUPLER - A low profile alignment coupler* allows the piston rod to self-center. This increases cylinder life especially when the support rods deflect under load.
• T-SLOT EXTRUDED ALUMINUM HOUSING - The anodized aluminum body incorporates square nut "T" slots. These slots allow maximum mounting flexibility for tooling changes. One adjustment simultaneously alters stroke, shock absorber position, and proximity sensor position. Dowel pin holes are optional.
• LIGHTWEIGHT BODY - The extruded aluminum housing's efficient design provides a substantial weight reduction. Lower weight allows for less inertia in applications requiring body movement. Consequently, higher cycle speeds and greater productivity can be attained.
• LINEAR BALL OR PTFE COMPOSITE BUSHINGS - Low friction, recirculating linear ball bushings provide high precision and speed. PTFE composite bushings are available for high impact loads, washdown, and very contaminated environments.
• ELECTRICAL POSITION SENSORS - Proximity sensors, Hall Effect and reed switches are available. Magnets are standard on all cylinders.